Banner Image


In this video, I put the Yeswelder Cut-65DS through the test and see how capable it is as a plasma cutter.


The YesWelder CUT-65DS plasma cutter is a non-high frequency start cutting machine. It adopts a “blow-back” start, which involves a rearward movement of the electrode within the torch head when forced by the air pressure. An excellent choice for home DIY jobs and light duty small business projects, and professionals, light and portable: Dimension: 16"(L)x 6.3"(W)x 11"(H). Weight: 17.2lb.

Non-HF Start

The “blow-back” start comes without interference and is safe and ideal for general use, friendly to the surrounding electrical machine and human health.

Non-touch Pilot ARC

The pilot arc torch efficiently cuts through rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip of the metal. Better cutting quality and longer consumable life.

Digital Control

  • Plasma cutting machine CUT-65DS adopts international leading MCU intelligent digital control technology, and all its major parts are performed through software.
  • Able to adjust the pilot arc time, pilot arc current, cutting current, and post slow time.
  • It is not sensitive to the change of parameters; the performance of the cutting machine will not be affected by the change of the parameters of certain parts.

Powerful Cutting:

  • Input Current (Circuit Breaker): 63A
  • Air Compressor Requirement:
  • Max Input 33A @220V, max Input 35A @110V
  • 10-43A DC output, 0.3-0.4 MPA, 5/8” ideal clean-cut, and 63/64” maximum severance cut,
  • 10-25A DC output, 0.4-0.5 MPA, 5/16" ideal clean-cut, and 5/8" maximum severance cut

Dual Voltage

Dual voltage capability allows the machine to run directly on 110 V 50/60 Hz power or on 220 V 50/60 Hz with the use of a power adapter.