“The flange and pipe were not pretty, but the repair needed to hold. The MIG-250 PRO had enough output to work the heavier joint and tie the weld into both pieces.”
MIG-250PRO
5 out of 5 stars4.8 (87 reviews)$510.40$638.00
or 4 payments of $127.60 with Klarna
A 250A multi-process MIG platform built for thicker material, aluminum welding, and more advanced MIG control.
- 4-in-1 welding for MIG, Flux, TIG, and Stick
- Synergic MIG with manual fine-tuning control
- Automatic aluminum pulse for cleaner welds
- Spool gun support for smoother aluminum feeding
- HD digital display with real-time parameters
- Dual-voltage setup for garage and shop use
Info & Benefits
WARNING: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit https://p65warnings.ca.gov.
Free standard shipping on orders over $150 within the contiguous US. Orders typically arrive in 3–5 business days. Expedited shipping options available at checkout.
Shipping policyIf you're not completely satisfied with your purchase, return it within 30 days for a full refund. No questions asked. Contact our support team to initiate a return.
Return policyCovered by a manufacturer warranty against defects in materials and workmanship.
Warranty termsGet the latest user manual and firmware for your machine.
Handle bigger jobs with the power and control to work across more materials.
More Features
Tap each feature to see the details.
Supports MIG, Flux-Cored, Lift TIG, and Stick welding to handle steel, stainless steel, aluminum, and general repair work.
Pulse welding helps improve arc stability, reduce spatter, and deliver cleaner results on aluminum and thinner materials.
Capable of smoother aluminum welding.
Synergic mode speeds up setup, while manual mode gives experienced welders full control over wire feed, voltage, and arc feel.
110V/220V input capability handles both garage power and stronger shop setups.
Built to weld carbon steel, stainless steel, aluminum, and flux-cored wire with material-specific setup options.
The HD digital display shows key welding settings in real time for faster adjustment and more confident control.
Built for Every Job
The flange and pipe were not pretty, but the repair needed to hold. The MIG-250 PRO had enough output to work the heavier joint and tie the weld into both pieces.
“A gate this large means hours of crossbars and corners, but the MIG-250 PRO fed wire without a hiccup, keeping my pace on the last section nearly the same as on the first.”
“With the frame squared, I used the MIG-250 PRO’s synergic setting as a baseline and got straight to work. It stayed dialed in through the repeated joints, which kept the job moving.”
“The worn machinery bracket was awkward to reach, but the MIG-250 PRO had the heat to rebuild the joint into a solid repair.”
Materials × Thickness.
Recommended process
Stick
TIG
MIGFlux-cored
StickTIGMIGFlux-cored5 × US $11 coin=2mm5 coins=10mm
Minimum20 GA0.9 mm
Maximum1/2"13 mm
Specifications
Power & Output
- Input Voltage
- 110V, 220V ±10% 50/60Hz
- Processes
- MIG (Pulse), Flux-Cored, Lift TIG, Stick
- Output Current Range
- MIG: 37-175A @ 110V; 37-250A @ 220V TIG: 15-175A @ 110V; 15-250A @ 220V Stick: 20-175A @ 110V; 20-250A @ 220V
- Duty Cycle
- MIG: 60% @ 250A
- Detailed Duty Cycle
- MIG (110V): 60% @ 175A; 100% @ 135A MIG (220V): 60% @ 250A; 100% @ 192A TIG (110V): 60% @ 175A; 100% @ 135A TIG (220V): 60% @ 250A; 100% @ 192A Stick (110V): 60% @ 175A; 100% @ 135A Stick (220V): 60% @ 250A; 100% @ 192A
Material & Capability
- Material Compatibility
- MIG: Steel, Stainless Steel, Aluminum TIG: Steel, Stainless Steel Stick: Steel
- Recommended Thickness
- MIG: ≤ 9/32" (7 mm) @ 110V; ≤ 1/2" (13 mm) @ 220V TIG: ≤ 9/32" (7 mm) @ 110V; ≤ 3/8" (10 mm) @ 220V Stick: ≤ 9/32" (7 mm) @ 110V; ≤ 3/8" (10 mm) @ 220V
MIG
- Synergic Function
- Supported
- Spool Gun Compatibility
- Supported
- MIG Wire Type
- ER70S-6 / E71T / ER308L / ER4043 / ER5356
- Wire Diameter
- .023" (0.6 mm) / .030" (0.8 mm) / .035" (0.9 mm) / .045" (1.1 mm)
- MIG Torch Type
- YW-L150-10E (European connector)
- Gas Requirements
- CO2 100%, Mix Gas, Argon 100%
- Wire Feed Mechanism
- 2-Roll, 4-Roll
- Consumables Compatibility
- Magnum 100L
TIG
- TIG Ignition Type
- Lift Start
- Foot Pedal Compatibility
- Not supported
- Tungsten Type
- WT20, WC20, WL20, WL15
- Tungsten Diameter
- ≤ 3/32" (2.4 mm) @ 110V ≤ 1/8" (3.2 mm) @ 220V
- TIG Torch Type
- WP-17V-35 (Optional. Sold separately.)
- TIG Filler Rod Material
- ER70S-6, ER308L
- TIG Filler Rod Diameter
- ≤ 3/32" (2.4 mm) @ 110V ≤ 1/8" (3.2 mm) @ 220V
- Gas Requirements
- 100% Argon
- Consumables Compatibility
- WP-17 / WP-18 / WP-26
Stick
- Stick Electrode Type
- E6011 / E6013 / E7018
- Stick Electrode Diameter
- ≤ 1/8" (3.2 mm) @ 110V ≤ 5/32" (4.0 mm) @ 220V
Plasma Cutting
- CNC Capability
- Not supported
Physical & Safety
- Display
- LED
- Fan Control
- Continuous Fan Mode
- App Control
- Not supported
- Weight
- 24.91 lbs
- Dimensions
- 16.93" × 8.27" × 11.81"
- Protection Features
- Overheat Overcurrent VRD (Voltage Reduction Device) - Stick
General
- Input Current
- 50A
- Open Circuit Voltage (OCV)
- MIG/TIG/Stick: 65V
- Generator Compatibility
- Generator not recommended. If necessary, use at least a 10 kW (15 HP), 120/240V generator with AVR.
- Cable Length
- Ground: 10 ft (3 m) MIG Gun: 10 ft (3 m)
- Power Cord Length
- 6.5 ft (2 m)
- Certification
- CE, ETL, UL
- Warranty
- 2 Years
All the essentials. And then some.
Before you ask.
The MIG-250-PRO-DG supports Gas MIG, Flux Core MIG, Lift TIG, and Stick welding.
The MIG-250-PRO-DG provides up to 250A output for thicker materials and professional fabrication work.
Yes. Select the Al Si or Al Mg program to activate optimized pulse welding for aluminum.
Yes. It supports spool gun mode with automatic current matching for smoother continuous aluminum MIG welding.
Yes. Aluminum pulse welding works in both Synergic and Manual modes, giving you either quick setup or more direct control.
The MIG-250-PRO-DG is rated at 50A input current.
What customers are saying.
Rating snapshot
5 stars
68
4 stars
18
3 stars
1
2 stars
0
1 star
0
Overall rating4.85 out of 5 stars87 reviews
Review this product
Share your experience with other welders.
Ricky Norman3 months ago
4 out of 5 starsMig 250 Pro Manual
Good welder. Spent to much time and still looking how to set up different settings from stick, flux, tig and gas mig settings on how to hook up cables. The pictures I got in the box, you cannot see them on the set up pictures being to small to see it correctly. They should have a larger pictures where you can see the cable hookups for all welding setups on flux, tig, stick and gas mig welding. I would had bought a different welding if I knew the cable hookups instructions and pictures we're to complicated to see to understand ! They should send out new cable hookup with larger pics you can s…
Patrick Tafoya4 months ago
5 out of 5 starsGreat machine for the price
We use this machine in our fabrication shop and it keeps up with or out lasts the Miller and Lincoln. YesWelder has great customer service and replaced a previously purchased machine with the MIG 250 Pro. Quality products.
Joe Robe6 months ago
4 out of 5 starsFantastic welds, but issues with the wire spool
When using a new wire spool, the wire frequently falls out of the spool as there is not enough resistence. I did contact support if there is a way to get it more tight.
Kerry Stottlemyer8 months ago
5 out of 5 starsBest bang for your buck
It's hard to believe you can get a small inexpensive wire feed welder that has a real world duty cycle. While this welder only has 26 volts in mig mode so it has a hard time doing spray mig. It has plenty of amps to get nearly any job done. It might even be a little to hot of a welder.
Stacey Lloyd8 months ago
5 out of 5 starsGeat welder
Good welder out of the box,pretty easy to set up,only got to use it it a couple of times so far,I'm getting ready to welder a cage in my son's derby car,I'm excited to see what it going to do!
Nathan Yurkanin8 months ago
4 out of 5 starsvery good for the money
had a blue machine. was very nice ,until motherboard went out. it cost half of what the machine cost. I fixed and sold. got the mig 250 and it took a little while to get used to(not quite as intuitive). have used fairly hard for a few years now.with very little.issues. I will admit, the stock gun is.not very heavy duty along with the ground clamp and the cord pulled out of the back f the machine. overall it is worth easily what I paid considering just the motherboard for my blue machine cost almost triple what this welder cost. will buy again if it dies.
Bruce Szymanski8 months ago
5 out of 5 starsMig-250 Pro
Been welding a long time needed a 220 machine didn't want to spend a lot of money so I tried the Mig-250 pro and it's awesome
Ronald Lee9 months ago
5 out of 5 starsRaymond, my customer service representative
Very nice welder, smooth minimal splatter, feeds very well. Settings for wire feed speeds and voltage are very accurate. Would recommend, easy to operate. Also, great price and exceptional customer service. Raymond, my customer service rep., has helped me throughout the purchase and additionally, with a shipping problem, on another purchase I made. He knows his job extremely well, and will make things RIGHT. GREAT Representative of this company. THANK YOU for your hard work and dedication to the customer. Ron
Dave Anderson10 months ago
5 out of 5 starsMig250
Nice machine i use it for my mobile welding service and so far i am pleased with it. Very ergonomic and change over is faily not problematic. Most likely i will be updating all fabrication equipment to yeswelder products. So good stuff!!!
Aaron J Coronado10 months ago
5 out of 5 starsGreat Welder!
first things first! I have now had this welder for just over a year and it has been nothing but great to me. my garage is dusty and dirty which are not particularly great conditions. this has been a freaking work horse in my garage from thick 9mm plate welding to roll cages, tube fronts ends, motor mounts and even sheet metal. it has been super solid with zero issues so i would say definitely a good purchase for the money!
Showing 1–10 of 87 reviews
Why Shop With YesWelder
2 Year Warranty
Covered by a 2-year manufacturer warranty against defects in materials and workmanship.
30-Day Money-Back Guarantee
If you're not completely satisfied with your purchase, return it within 30 days for a full refund. No questions asked.
Free Contiguous US Shipping Over $150
Free standard shipping on orders over $150 within the contiguous US. Orders typically arrive in 3–5 business days.