Skip to content
MIG-205DS-B
110V / 220V Dual Voltage / Gas MIG/Gasless MIG/Lift TIG/Stick 4 in 1 / Synergic & Manual MIG Setting /Ideal for 7018/6011 Electrode / Spool Gun Compatible.
FEATURES
- 4 Functions in 1: Gas MIG/Gasless MIG/Lift TIG/Stick.
- Aluminum MIG available, spool gun compatible.
- Synergic Controlled & Manual Adjsutable MIG function, suit for new welders and experienced welders.
- Can take up to 0.9mm (.035") MIG solid wire (Gas MIG) and 0.9mm (.035") MIG FLux wire (Gasless MIG).
- Apply to D100/D200 rolls (≤10lbs) of MIG wire.
- 200 Amp Gas/Gasless MIG welder with a 30 Amp plug (220V).
- 160 Amp Gas/Gasless MIG welder with a 50 Amp plug (110V).
Quick-Selection Design
Allowing for easy switch to different welding modes to meet different welding requirements. (Gas/Gasless MIG, Stick or Lift TIG)
Synergic Control MIG
Allowing automatic change of the voltage & wire feeding speed by adjusting the amperage or thicknesses. It will match the welding chart set in the data.
Dual Voltage
Capable to run directly on 220V (±10%) 50/60 Hz power or on 110V (±10%) 50/60 Hz with the use of a power adapter.
MIG
Gas Welding
Shield gas: 100% CO2/MIG, 25%CO2, 75% Argon MIG welding for mild steel, 2%CO2, 98% argon for stainless steel, 100% argon for aluminum.
Wire recommendation: .030" (0.8mm) &.035" (0.9mm) ER70S-6 mild steel MIG welding wire & ER308L stainless steel MIG welding wire.
5/8"-18RH gas fitting easy to install and remove.
MIG
Gasless Welding
Release hard moving of gas cylinder, release the low efficiency of stick welds, works with gasless flux wire perfectly.
Welding wire recommendation: .030" & .035" ET71-GS flux wire.
Variable MIG Setting
Synergic MIG Setting: provides communication between the power source, feeder, and torch--allows for automatic change of the voltage & wire feeding speed by adjusting the amperage or thicknesses. Easy works with new welders or users.
Manual MIG Setting: meet the need of an experienced and professional welder by adjusting the voltage & wire feeding speed separately.
Aluminum MIG Welding
Capable of welding aluminum by using 100% argon.
1. Graphene feeding liner with regular MIG torch with synergic MIG control
2. Spool gun with manual MIG control.
Recommend aluminum welding wire(1lb): Silicon aluminum ER4043 and Magnesium aluminum ER5356 welding wire
Wire Recommendation
Compatible with 2-lbs and 10-lbs welding wire (4" or 8" wire diameter: D100/D200).
Suitable for several welding requirements.
.023”/.030”/.035" ER70S-6 mild steel MIG welding. wire/ER308L stainless steel wire.
.023”/.030”/.035” E71-GS flux core wire for manual MIG setting; only .035” available in synergic MIG setting.
.035”/.045” ER5356 magnesium aluminum welding wire / ER4043 silicon aluminum welding wire.
DC Stick Welding
Smooth welding and fast burning.
Capable of welding with 7018/6011 electrodes.
Electrode up to 1/8"@110V, 5/32"@220V.
Apply to 9/64" thick carbon steel @110V, 13/64"@220V.
Lift TIG Welding
Capable of Lift TIG welding.
Accessories for TIG welding-TIG torch and tungsten not included.
Recommend to use YesWelder WP-17V-35 TIG torch.
Specifications
Product weight: 23lb
Product Dimensions: 18.11"*8.07"*14.17"
Supply Voltage: 110V/220V 50/60 Hz
Input Current: 45A@110V, 30A@220V
Output Current:
@220V: 30-205A (MIG) 20-180A (Stick) 20-205A (TIG)
@110V: 30-166A (MIG) 20-146A (Stick)
Duty Cycle (MIG): @110V, 60%@160A, 100%@123A @220V, 60%@205A, 100%@158A
Wire Spool: 2LB/10LB
Welding Material: Carbon Steel/Stainless Steel/Aluminum
Protection Class: IP21S
D
This was is just right for a small shop
M
Works great on all functions. Great buy super happy!
Z
So far I have just tried the flux core option but it seems to work alot better than my previous welder I am excited to use the solid core and aluminum options in the future this makes my third yeswelder product and I am happy with all of them
f
Awesome welder with stick haven't had the chance to try it with anything else
A
Im a semi retired building contractor who took on a full time job as the physical facility’s manager at a local fabrication shop. 90% of my job is improving properties. Building compressor shed etc. etc. as not slow down production many of my projects involved some sort of welding. I decided that it was time to learn. With help and tips from my co workers, I started out on a 110 miller mig welder, and absolutely loved it. When it came time to find a personal welder to use at home I did a lot of research and decided on the mg205ds. I’m very happy with it so far. On the mig and stick it welds just as good as the bigger Millers I moved up to. The instructions on the controls are a little lacking, but YouTube videos made up for it. The ONLY thing I was not liking was how the nozzle threaded on to the tip with a plastic bushing that melted in the first 30 minutes…. The plastic is melted and the nozzle drifts, which messed with the wire feed when in sank too deep. The trigger feel is great, but maybe on the next revision I’d deal with that. 4 out of 5! 5 out of 5 on the price.