

CUT-55DS NHF PLUS
5 out of 5 stars4.9 (90 reviews)$339.00
or 4 payments of $84.75 with Klarna
Limited-Time Deal
Save $67.80
55A non-HF plasma cutter designed to reduce high-frequency interference around sensitive equipment.
- 4-in-1 cutting, gouging & marking
- 55A dual-voltage plasma power
- Up to 1/2" clean cut
- Non-HF start protects electronicsSmart digital pressure display
Info & Benefits
WARNING: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit https://p65warnings.ca.gov.
Free standard shipping on orders over $150 within the contiguous US. Orders typically arrive in 3–5 business days. Expedited shipping options available at checkout.
Shipping policyIf you're not completely satisfied with your purchase, return it within 30 days for a full refund. No questions asked. Contact our support team to initiate a return.
Return policyCovered by a manufacturer warranty against defects in materials and workmanship.
Warranty terms
More Features
Tap each feature to see the details.

Switches between Cutting, Grid Cutting, Gouging, and Marking without changing machines.

Delivers 20-55A on 220V and 20-35A on 110V for shop, garage, and field use.

Cuts rough, painted, or rusty metal without touching the tip to the workpiece.

Starts cleanly without high-frequency interference, helping protect CNC systems and nearby electronics.

Cuts up to 1/2" clean on 220V and handles steel, stainless steel, aluminum, and other conductive metals.

Pre-installed air control helps deliver cleaner airflow, easier setup, and more consistent cutting performance.
Specifications
Power & Output
- Input Voltage
- 110V, 220V ±10% 50Hz
- Processes
- Plasma
- Output Current Range
- Plasma: 20-35A @ 110V; 20-55A @ 220V
- Duty Cycle
- Plasma: 60% @ 55A1
Material & Capability
- Material Compatibility
- Plasma: Steel, Stainless Steel, Aluminum
- Clean Cut Thickness
- 5/16" (8 mm) @ 110V 1/2" (13 mm) @ 220V
- Severance Cut Thickness
- 5/8" (16 mm) @ 110V 3/4" (20 mm) @ 220V
TIG
- Foot Pedal Compatibility
- Not supported
Plasma Cutting
- Plasma Arc Starting
- Back-flow Start
- Air Pressure
- 50-60 PSI @ 110V; 55-70 PSI @ 220V
- Air Flow
- ≥ 6.0 CFM
- Plasma Torch Type
- IPT40 (M16 × 1.5 connector, 2-pin control cable)
Physical & Safety
- Display
- LED
- Fan Control
- Continuous Fan Mode
- Weight
- 13.01 lbs
- Dimensions
- 14.6" × 6.1" × 8.86"
What's included & Compare Bundles


Work Clamp & Cable

Power Adapter

Air Hose

IPT40 Plasma Cutting Torch

PC10-02 Air Connector
All the essentials. And then some.
How it compares.
Before you ask.
The CUT-55NHF PLUS supports cutting, grid cutting, gouging, and marking in one plasma cutter.
Non-HF blow-back start provides safe, stable arc starting without high-frequency interference.
Yes. It supports dual-voltage operation, with 20-35A output on 110V and 20-55A output on 220V.
The CUT-55NHF PLUS is rated for up to 1/2 inch clean cut capacity.
The CUT-55NHF PLUS cuts conductive metals including steel, stainless steel, aluminum, and similar metals.
Use grid cutting mode when cutting expanded metal, mesh, or grating where a standard cut mode may snag or lose arc stability.
What customers are saying.
Share your experience with other welders.
Works only after NOT following the manual
The cutter comes with a spacer, but it looks like this is for a different nozzle then the one delivered. Took me a while to figure it out as the arc always shut off. Without the spacer it works very well
Awesome
I got a plasma torch and it is awesome. Customer support agent Raymond is the best.
First time buyer
I’m very satisfied with the shipping the packaging and the machine
great product
It works amazing I love it
Unbeatable for the price
Shipped same day and arrived within a few days. Comes with everything you need to get started. Setup was quick and easy. The machine works as advertised.
Great so far
Haven't used it much but what I have used of it is easy to use. Have had other older cutters that were difficult to operate. The non-touch start is awesome.
Cut-55ds-pro
This thing work amazing great product for the price
No Brainerd for the price
Had the wife order the cut-55ds pro off amazon. It was at the house 2 days later. Running off 220, 50 amp breaker with my tiny 8 gallon husky compressor (4.8 scam @40, 3.7 scam @90psi). I need to wire my 80 gallon still. Put it to work on 11g plate (1/8") and a small 2" cut on 5/8" plate and had no problem. I'm running 75 psi on all cuts and just leave it at 55 amps. Very clean cuts (with a straight edge). Even the 5/8 freehand doesn't look terrible. Pros: price, delivery time, setup (with exception of red locktite on fitting where quick connect needs to go), size, weight, performance. Cons: ground clamp feels flimsy(easy fix if necessary), no back up consumables (not a big deal), led screen really unnecessary Cons are a little nit picky. I can't make claims on longevity but seems really well built for the price.
Air pressure
You don’t necessarily need an air compressor with 7.5 cfm. Mine cuts just fine with a 4.0 cfm and I’ve been using it for nearly a year. Great little machine for the shop for sure! And the price is affordable! Cut 3/8” plate all day long with this!
Weekend Warrior
Still too early for a comprehensive review, but right out of the box, it cut through stainless steel panel like I hoped. Had just a tiny bit of trouble with a severely rusted BBQ pit, but then it kept it's arc & finished the cuts. Yes, the ground clamp was attached to cleaned steel, just a tight space to cut dirty metal, no gig on the machine. I like the total control the machine gives me. I'm able to dial in a longer post airflow to cool the cutting tip. The only things I noted, unboxing, was a lack of cutting tips. Just a couple extra would go a long way toward customer satisfaction. There's no explanation of that little flat tool I found. And there's a very slight goof on page 9 of the manual. The illustrations of the nozzle cup & standoff guide should be switched to opposite positions. However, those are only minor discrepancies. All-in-all I've found a new tool to love. A more comprehensive review would take me a bit more time, because as I said, I'm just a hobbyist, just a weekend warrior. Thanks YESWELDER.!
Showing 1–10 of 90 reviews
Why Shop With YesWelder
1. Detailed Duty Cycle: Plasma (110V): 60% @ 35A; 100% @ 27A · Plasma (220V): 60% @ 55A; 100% @ 42A













