20241205-181055.jpeg__PID:0f7bee2d-02d8-4921-8125-8207ff1e663d

DP200 Welding Machine Software Upgrade Guide

Follow the steps below to upgrade the welding machine software and verify the software version after the upgrade is complete.

USB Drive Upgrade Requirements:

  • For the best performance, use a USB drive of 8GB or smaller. USB drives larger than 32GB cannot be recognized by the device.
  • Do not use SD card-to-USB adapters for this upgrade.
  • The USB drive’s file system must be FAT32 format.
  • Ensure that the extracted upgrade files are located in the root directory of the USB drive.
  • Do not change the names or file types of the files or folders in the upgrade package.
20250117-172615.jpg__PID:66103b8f-118a-410a-bc75-9b3e2a6a5bd7

Step 1:

Check Current Software Version

Before upgrading, go to the settings section of the welding machine and check the current software version.

Ensure that the upgrade package you download matches the current version.

1.jpg__PID:59ee0a89-6549-43ef-a792-3655610cddc1

Step 2:

Prepare USB Drive

Download and extract the upgrade package. Copy the two .bin files and one private folder to the root directory of the USB drive (Type-C output).

To ensure the device successfully recognizes the USB, avoid storing any other files on the USB drive.

update port.jpg__PID:f6bd378b-4cfd-400b-a8f8-e07c5f156c07

Step 3:

Connect the Device

Ensure the welding machine is turned off.

Insert the USB drive into the Type-C upgrade port located on the wire feeding section of the welding machine.

5.jpg__PID:3604ed99-16b2-44c2-9012-0c7f6a936203

Step 4:

Power On and Start Upgrade

Turn on the welding machine.

The machine will automatically detect the upgrade files on the USB drive, and the screen will show the upgrade progress bar.

The upgrade process takes some time, approximately 4 minutes.

20241205-134225.jpg__PID:8f32d30e-0d84-473e-8d25-57ca88ce7ba9

Step 5:

Complete the Upgrade

When the screen displays "Update Finished, please remove SD CARD OR U disk", it indicates that the upgrade is complete.

At this point, turn off the welding machine, then safely remove the USB drive from the Type-C port.

20250117-172615.jpg__PID:f395c7cd-f242-4cf1-97f2-bc29b1831977

Step 6:

Verify the Upgrade

Restart the welding machine.

Go to the settings section and check the software version.

Confirm that the software has been successfully updated to the latest version.

Attention

If the upgrade fails or the files are not recognized, please verify that the USB drive’s file format and file location are correct. Then, try the upgrade process again.

Software Upgraded Version List

Version 3.1
  • New 120V Pulse MIG Function--Supports welding carbon steel, stainless steel, and aluminum with a 0.9mm welding wire diameter.
  • 240V Pulse MIG Function Optimization--Now supports 0.9mm aluminum welding wire for better versatility in welding materials.
  • Welding Parameter Optimization--Enhanced welding parameters for improved performance and welding results.
  • Help Page Improvement--Updated and more user-friendly help page to assist with troubleshooting and product usage.

Download Section:

📑

Please reach out at care@yeswelder.com to get the upgrade software package.

Version 4.1 Coming Soon

Version 4.1 Update Details:

  • New 120V Pulse MIG Mode--Supports welding carbon steel, stainless steel, and aluminum with a .035" (0.9mm) welding wire diameter.
  • 240V Pulse MIG Mode Enhancement--Now supports .035" (0.9mm) aluminum welding wire for better versatility in materials types.
  • Welding Parameters Optimization--Enhanced welding parameters for improved performance and welding results.
  • Help Page Improvement--Updated and more user-friendly help page to assist with troubleshooting and product usage.
  • Standard MIG (120V & 240V)--Now supports welding stainless steel using 98% Argon + 2% CO₂ gas.
  • Pulse MIG Mode Enhancement--Now supports welding carbon steel and stainless steel with a .030"(0.8mm) wire diameter.

Download Section:

📑

Please reach out at care@yeswelder.com to get the upgrade software package.

Download Section:

📑

Since this is our first time offering a software upgrade for users to install, and we've received reports of some issues, we'll roll it out in phases to ensure a smooth process.

Please complete the survey to receive the installation package by email.

Once it's stable, we'll make it available for self-download.

Customer Support

Customer Support

If you encounter any issues during the upgrade process, feel free to contact us:

Email:

Phone:

Toll Free: (855) 937-4567
Mon.-Sun. 9AM-9PM EST