Compare MIG Welders
MIG-205DS PRO
Synergic multiprocess MIG that handles aluminum with a spool gun.
From $367.20$459.00
or 4 payments of $91.80 with Klarna*
DP200
Dual-pulse MIG that welds aluminum like a pro.
From $579.99$699.00
or 4 payments of $145.00 with Klarna*
FLUX-135PRO
Gasless flux-core 3-in-1 that runs on any 110V outlet.
From $159.00
or 4 payments of $39.75 with Klarna*
Quick Look
- 205A synergic MIG
- Key Feature
- LED
- Display
- Steel / Stainless / Aluminum
- Material Compatibility
- ≤ 19/32" (15 mm) @ 220V
- Recommended Thickness
- 205A
- Max Output
- MIG / Flux / TIG / Stick
- Processes
- 110V / 220V
- Input Voltage
- Dual Pulse MIG
- Key Feature
- 7" LCD
- Display
- Steel / Stainless / Aluminum
- Material Compatibility
- ≤ 3/8" (10 mm) @ 240V
- Recommended Thickness
- 200A
- Max Output
- MIG / Flux / TIG / Stick
- Processes
- 120V / 240V
- Input Voltage
- Synergic flux-cored
- Key Feature
- LED
- Display
- Steel / Stainless
- Material Compatibility
- ≤ 3/16" (5 mm) @ 110V
- Recommended Thickness
- 135A
- Max Output
- Flux / TIG / Stick
- Processes
- 110V
- Input Voltage
Power & Output
Input Voltage
110V, 220V ±10% 50/60Hz
120V, 240V ±10% 50/60Hz
110V ±10% 50/60Hz
Processes
MIG, Flux-Cored, Lift TIG, Stick
MIG (Pulse), Flux-Cored, Lift TIG, Stick
Flux-Cored, Lift TIG, Stick
Output Current Range
MIG: 30-160A @ 110V; 30-205A @ 220V TIG: 15-140A @ 110V; 15-205A @ 220V Stick: 20-140A @ 110V; 20-205A @ 220V
MIG: 30-120A @ 120V; 30-200A @ 240V TIG: 10-120A @ 120V; 10-200A @ 240V Stick: 10-120A @ 120V; 10-180A @ 240V
Flux-Cored: 35-135A @ 110V TIG: 15-135A @ 110V Stick: 20-135A @ 110V
Duty Cycle
MIG: 60% @ 205A
MIG: 60% @ 130A
Flux-Cored: 60% @ 135A
Detailed Duty Cycle
MIG (110V): 60% @ 160A; 100% @ 123A MIG (220V): 60% @ 205A; 100% @ 158A TIG (110V): 60% @ 140A; 100% @ 108A TIG (220V): 60% @ 205A; 100% @ 158A Stick (110V): 60% @ 140A; 100% @ 112A Stick (220V): 60% @ 205A; 100% @ 139A
MIG (120V): 60% @ 78A; 100% @ 60A MIG (240V): 60% @ 130A; 100% @ 100A TIG (120V): 60% @ 78A; 100% @ 60A TIG (240V): 60% @ 130A; 100% @ 100A Stick (120V): 60% @ 78A; 100% @ 60A Stick (240V): 60% @ 117A; 100% @ 90A
Flux-Cored: 60% @ 135A; 100% @ 104A TIG: 60% @ 135A; 100% @ 104A Stick: 60% @ 135A; 100% @ 104A
Material & Capability
Material Compatibility
MIG: Steel, Stainless Steel, Aluminum TIG: Steel, Stainless Steel Stick: Steel
MIG: Steel, Stainless Steel, Aluminum TIG: Steel, Stainless Steel Stick: Steel
Flux-Cored: Steel, Stainless Steel TIG: Steel, Stainless Steel Stick: Steel
Recommended Thickness
MIG: ≤ 3/16" (5 mm) @ 110V; ≤ 1/2" (13 mm) @ 220V TIG: ≤ 1/8" (3 mm) @ 110V; ≤ 5/16" (8 mm) @ 220V Stick: ≤ 5/16" (8 mm) @ 110V; ≤ 19/32" (15 mm) @ 220V
MIG: ≤ 1/8" (3 mm) @ 120V; ≤ 3/8" (10 mm) @ 240V TIG: ≤ 1/8" (3 mm) @ 120V; ≤ 3/8" (10 mm) @ 240V Stick: ≤ 1/8" (3 mm) @ 120V; ≤ 3/8" (10 mm) @ 240V
Flux-Cored: ≤ 3/16" (5 mm) @ 110V TIG: ≤ 5/32" (4 mm) @ 110V Stick: ≤ 3/16" (5 mm) @ 110V
MIG
Synergic Function
Supported
Supported
Supported
Spool Gun Compatibility
Supported
Supported
Not supported
MIG Wire Type
ER70S-6 / E71T / ER308L / ER4043 / ER5356
ER70S-6 / E71T / ER308L / ER4043 / ER5356
E71T
Wire Diameter
.023" (0.6 mm) / .030" (0.8 mm) / .035" (0.9 mm) / .045" (1.1 mm)
.023" (0.6 mm) / .030" (0.8 mm) / .035" (0.9 mm) / .045" (1.1 mm)
.030" (0.8 mm) / .035" (0.9 mm)
MIG Torch Type
YW-L150-10E (European connector)
24KD (European connector)
YW-FLUX135 (10-25 connector, 2-pin control cable)
Gas Requirements
CO2 100%, Mix Gas, Argon 100%
CO2 100%, Mix Gas, Argon 100%
No gas (Flux-Cored)
Wire Feed Mechanism
2-Roll, 4-Roll
2-Roll, 4-Roll
2-Roll
Consumables Compatibility
Magnum 100L
24KD Binzel
Magnum 100L
TIG
TIG Ignition Type
Lift Start
Lift Start
Lift Start
Foot Pedal Compatibility
Not supported
Supported
Not supported
Tungsten Type
WT20, WC20, WL20, WL15
WT20, WC20, WL20, WL15
WT20, WC20, WL20, WL15
Tungsten Diameter
≤ 3/32" (2.4 mm)
≤ 3/32" (2.4 mm) @ 120V ≤ 1/8" (3.2 mm) @ 240V
≤ 3/32" (2.4 mm) @ 110V
TIG Torch Type
WP-17V-35 (Optional. Sold separately.)
WP-17V-35 (Optional. Sold separately.)
WP-17V-10 (Optional. Sold separately.)
TIG Filler Rod Material
ER70S-6, ER308L
ER70S-6, ER308L
ER70S-6, ER308L
TIG Filler Rod Diameter
≤ 3/32" (2.4 mm)
≤ 3/32" (2.4 mm) @ 120V ≤ 1/8" (3.2 mm) @ 240V
≤ 3/32" (2.4 mm) @ 110V
Gas Requirements
100% Argon
100% Argon
100% Argon
Consumables Compatibility
WP-17 / WP-18 / WP-26
WP-17 / WP-18 / WP-26
WP-17 / WP-18 / WP-26
Stick
Stick Electrode Type
E6013 / E7018
E6010 / E6011 / E6013 / E7018
E6011 / E6013 / E7018
Stick Electrode Diameter
≤ 5/32" (4.0 mm)
≤ 3/32" (2.4 mm) @ 120V ≤ 5/32" (4.0 mm) @ 240V
≤ 1/8" (3.2 mm) @ 110V
Plasma Cutting
CNC Capability
Not supported
Not supported
Not supported
Physical & Safety
Display
LED
7" LCD
LED
Fan Control
Continuous Fan Mode
Fan on Demand
Continuous Fan Mode
App Control
Not supported
Not supported
Not supported
Weight
22.7 lbs
28.2 lbs
10.98 lbs
Dimensions
16.93" × 8.27" × 14.17"
17.7" × 9.4" × 8.1"
14.57" × 6.1" × 8.66"
Protection Features
Overheat Overcurrent Undervoltage
Short-Circuit Overheat Overcurrent Overvoltage Undervoltage Gun Trigger Short-Circuit Alert (MIG/TIG) VRD (Voltage Reduction Device) - Stick Wire Feeder Fault Alert (MIG)
Overheat Overcurrent
General
Input Current
50A @ 110V; 40A @ 220V
50A @ 110V; 40A @ 220V
50A
Open Circuit Voltage (OCV)
MIG/TIG/Stick: 65V
MIG/TIG/Stick: 81V
Flux-Cored/TIG/Stick: 65V
Generator Compatibility
Generator not recommended. If necessary, use at least a 10 kW (15 HP), 120/240V generator with AVR.
Minimum generator: 10 kW (15 HP)
Generator not recommended. If necessary, use at least a 10 kW (15 HP), 120/240V generator with AVR.
Cable Length
Ground: 10 ft (3 m) MIG Gun: 10 ft (3 m)
Ground: 10 ft (3 m) MIG Gun: 10 ft (3 m)
Ground: 6.5 ft (2 m) MIG Gun: 8 ft (2.5 m)
Power Cord Length
6.5 ft (2 m)
6.5 ft (2 m)
5.9 ft (1.8 m)
Certification
CE, ETL, UL
Not applicable
CE, ETL, UL
Warranty
2 Years
3 Year
2 Years