Compare All Welders
MP200 PRO
5-in-1 pulse MIG with HF TIG and a built-in plasma cutter.
From $849.15$999.00
or 4 payments of $212.29 with Klarna*
DP200
Dual-pulse MIG that welds aluminum like a pro.
From $594.15$699.00
or 4 payments of $148.54 with Klarna*
CUT-65DS PLUS
Heavy-duty pilot-arc plasma with gouging support.
From $319.20$399.00
or 4 payments of $79.80 with Klarna*
Quick Look
- Pulse all-in-one
- Key Feature
- 7" LCD
- Display
- Steel / Stainless / Aluminum
- Material Compatibility
- ≤ 3/8" (10 mm) @ 240V
- Recommended Thickness
- 200A
- Max Output
- MIG / Flux / TIG / Stick / Plasma
- Processes
- 120V / 240V
- Input Voltage
- Dual Pulse MIG
- Key Feature
- 7" LCD
- Display
- Steel / Stainless / Aluminum
- Material Compatibility
- ≤ 3/8" (10 mm) @ 240V
- Recommended Thickness
- 200A
- Max Output
- MIG / Flux / TIG / Stick
- Processes
- 120V / 240V
- Input Voltage
- Pilot arc + gouging
- Key Feature
- LED
- Display
- Steel / Stainless / Aluminum
- Material Compatibility
- ≤ 9/16" (14 mm) @ 220V
- Recommended Thickness
- 65A
- Max Output
- Plasma
- Processes
- 110V / 220V
- Input Voltage
Power & Output
Input Voltage
120V, 240V ±10% 50/60Hz
120V, 240V ±10% 50/60Hz
110V, 220V ±10% 50Hz
Processes
MIG (Pulse), Flux-Cored, DC HF/Lift TIG (Pulse), Stick (Pulse), Plasma
MIG (Pulse), Flux-Cored, Lift TIG, Stick
Plasma
Output Current Range
MIG: 30-140A @ 120V; 30-200A @ 240V TIG: 10-120A @ 120V; 10-200A @ 240V Stick: 10-120A @ 120V; 10-180A @ 240V Plasma: 15-25A @ 120V; 15-40A @ 240V
MIG: 30-120A @ 120V; 30-200A @ 240V TIG: 10-120A @ 120V; 10-200A @ 240V Stick: 10-120A @ 120V; 10-180A @ 240V
Plasma: 20-45A @ 110V; 20-65A @ 220V
Duty Cycle
MIG: 60% @ 130A
MIG: 60% @ 130A
Plasma: 60% @ 65A
Detailed Duty Cycle
MIG (120V): 60% @ 98A; 100% @ 76A MIG (240V): 60% @ 130A; 100% @ 100A TIG (120V): 60% @ 98A; 100% @ 76A TIG (240V): 60% @ 130A; 100% @ 100A Stick (120V): 60% @ 98A; 100% @ 76A Stick (240V): 60% @ 130A; 100% @ 100A Plasma (120V): 60% @ 21A; 100% @ 16A Plasma (240V): 60% @ 26A; 100% @ 20A
MIG (120V): 60% @ 78A; 100% @ 60A MIG (240V): 60% @ 130A; 100% @ 100A TIG (120V): 60% @ 78A; 100% @ 60A TIG (240V): 60% @ 130A; 100% @ 100A Stick (120V): 60% @ 78A; 100% @ 60A Stick (240V): 60% @ 117A; 100% @ 90A
Plasma (110V): 60% @ 45A; 100% @ 35A Plasma (220V): 60% @ 65A; 100% @ 50A
Material & Capability
Material Compatibility
MIG: Steel, Stainless Steel, Aluminum TIG: Steel, Stainless Steel Stick: Steel Plasma: Steel, Stainless Steel, Aluminum
MIG: Steel, Stainless Steel, Aluminum TIG: Steel, Stainless Steel Stick: Steel
Plasma: Steel, Stainless Steel, Aluminum
Recommended Thickness
MIG: ≤ 1/8" (3 mm) @ 120V; ≤ 3/8" (10 mm) @ 240V TIG: ≤ 1/8" (3 mm) @ 120V; ≤ 3/8" (10 mm) @ 240V Stick: ≤ 1/8" (3 mm) @ 120V; ≤ 3/8" (10 mm) @ 240V
MIG: ≤ 1/8" (3 mm) @ 120V; ≤ 3/8" (10 mm) @ 240V TIG: ≤ 1/8" (3 mm) @ 120V; ≤ 3/8" (10 mm) @ 240V Stick: ≤ 1/8" (3 mm) @ 120V; ≤ 3/8" (10 mm) @ 240V
Not applicable
Clean Cut Thickness
3/16" (5 mm) @ 120V 3/8" (10 mm) @ 240V
Not applicable
3/8" (10 mm) @ 110V 9/16" (14 mm) @ 220V
Severance Cut Thickness
1/4" (6 mm) @ 120V 1/2" (13 mm) @ 240V
Not applicable
5/8" (16 mm) @ 110V 1" (25 mm) @ 220V
MIG
Synergic Function
Supported
Supported
Not applicable
Spool Gun Compatibility
Supported
Supported
Not applicable
MIG Wire Type
ER70S-6 / E71T / ER308L / E308LFC-O / ER4043 / ER5356
ER70S-6 / E71T / ER308L / ER4043 / ER5356
Not applicable
Wire Diameter
.023" (0.6 mm) / .030" (0.8 mm) / .035" (0.9 mm) / .045" (1.1 mm)
.023" (0.6 mm) / .030" (0.8 mm) / .035" (0.9 mm) / .045" (1.1 mm)
Not applicable
MIG Torch Type
24KD (European connector)
24KD (European connector)
Not applicable
Gas Requirements
CO2 100%, Mix Gas, Argon 100%
CO2 100%, Mix Gas, Argon 100%
Not applicable
Wire Feed Mechanism
2-Roll, 4-Roll
2-Roll, 4-Roll
Not applicable
Consumables Compatibility
24KD Binzel
24KD Binzel
Not applicable
TIG
TIG Ignition Type
HF Start / Lift Start
Lift Start
Not applicable
Foot Pedal Compatibility
Supported
Supported
Not supported
Tungsten Type
WT20, WC20, WL20, WL15
WT20, WC20, WL20, WL15
Not applicable
Tungsten Diameter
≤ 3/32" (2.4 mm) @ 120V ≤ 1/8" (3.2 mm) @ 240V
≤ 3/32" (2.4 mm) @ 120V ≤ 1/8" (3.2 mm) @ 240V
Not applicable
TIG Torch Type
WP-26 (M16 × 1.5 connector, 5-pin control cable)
WP-17V-35 (Optional. Sold separately.)
Not applicable
TIG Filler Rod Material
ER70S-6, ER308L
ER70S-6, ER308L
Not applicable
TIG Filler Rod Diameter
≤ 3/32" (2.4 mm) @ 120V ≤ 1/8" (3.2 mm) @ 240V
≤ 3/32" (2.4 mm) @ 120V ≤ 1/8" (3.2 mm) @ 240V
Not applicable
Gas Requirements
100% Argon
100% Argon
Not applicable
Consumables Compatibility
WP-17 / WP-18 / WP-26
WP-17 / WP-18 / WP-26
Not applicable
Stick
Stick Electrode Type
E6010 / E6011 / E6013 / E7018
E6010 / E6011 / E6013 / E7018
Not applicable
Stick Electrode Diameter
≤ 3/32" (2.4 mm) @ 120V ≤ 5/32" (4.0 mm) @ 240V
≤ 3/32" (2.4 mm) @ 120V ≤ 5/32" (4.0 mm) @ 240V
Not applicable
Plasma Cutting
Pilot Arc
Supported
Not applicable
Supported
Plasma Arc Starting
HF Start
Not applicable
Back-flow Start
Gouging Function
Not applicable
Not applicable
Supported
Air Pressure
90 PSI (5.9 bar)
Not applicable
50-60 PSI @ 110V; 55-70 PSI @ 220V
Air Flow
6.7 CFM (188 L/min)
Not applicable
≥ 6.0 CFM
Recommended Compressor
30-60 gal, ≥ 2 HP
Not applicable
30-60 gal, ≥ 2 HP
Plasma Torch Type
AG60 (M16 × 1.5 connector, 2-pin control cable)
Not applicable
IPT40 (central port)
CNC Capability
Not supported
Not supported
Not supported
Gas Requirements
Compressed Air
Not applicable
Compressed Air
Consumables Compatibility
AG60
Not applicable
IPT40
Physical & Safety
Display
7" LCD
7" LCD
LED
Fan Control
Fan on Demand
Fan on Demand
Continuous Fan Mode
App Control
Not supported
Not supported
Not supported
Weight
34 lbs
28.2 lbs
14 lbs
Dimensions
20.87" × 9.45" × 15.75"
17.7" × 9.4" × 8.1"
16.85" × 5.9" × 11.8"
Protection Features
Short-Circuit Overheat Overcurrent Overvoltage Undervoltage Gun Trigger Short-Circuit Alert (MIG/TIG/Plasma) VRD (Voltage Reduction Device) - Stick Wire Feeder Fault Alert (MIG) Low Input Air Pressure Alert (Plasma)
Short-Circuit Overheat Overcurrent Overvoltage Undervoltage Gun Trigger Short-Circuit Alert (MIG/TIG) VRD (Voltage Reduction Device) - Stick Wire Feeder Fault Alert (MIG)
Overheat Overcurrent Overvoltage
General
Input Current
50A
50A @ 110V; 40A @ 220V
50A
Open Circuit Voltage (OCV)
MIG/TIG/Stick: 81V Plasma: 333V
MIG/TIG/Stick: 81V
Plasma: 340V
Generator Compatibility
Minimum generator: 10 kW (15 HP)
Minimum generator: 10 kW (15 HP)
Minimum generator: 10 kW (15 HP)
Cable Length
Ground: 10 ft (3 m) MIG Gun: 10 ft (3 m) TIG Torch: 13 ft (4 m) Plasma Torch: 13 ft (4 m) Clean Torch: 13 ft (4 m)
Ground: 10 ft (3 m) MIG Gun: 10 ft (3 m)
Ground: 10 ft (3 m) Plasma Torch: 13 ft (4 m)
Power Cord Length
6.5 ft (2 m)
6.5 ft (2 m)
6.5 ft (2 m)
Certification
Not applicable
Not applicable
CE, ETL, UL
Warranty
3 Year
3 Year
2 Years