MIG-205DS
110v/220v Dual Voltage / Gas MIG/Gasless MIG/Lift TIG/Stick 4 in 1 / Synergic Controled MIG Setting /Ideal for 7018/6011 Electrode / IGBT Inverter Welder.
FEATURES
- Synergic Controlled on MIG function, very easy and simple operation.
- 4 Functions in 1 of Gas MIG/Gasless MIG/Lift TIG/Stick.
- Can take up to 0.9mm (.035") MIG solid wire (Gas MIG) and 0.9mm (.035") MIG FLux wire (Gasless MIG).
- Apply to D100/D200 rolls (≤10lbs) of MIG wire.
- 200 Amp Gas/Gasless MIG welder with a 35 Amp plug (220V).
- 160 Amp Gas/Gasless MIG welder with a 50 Amp plug (110V).


Quick-Selection Design
Allowing for easy switch to different welding modes to meet different welding requirements. (Gas/Gasless MIG, Stick or Lift TIG)

Synergic Control MIG
Allowing automatic change of the voltage & wire feeding speed by adjusting the amperage or thicknesses. It will match the welding chart set in the data.

Dual Voltage
Capable to run directly on 110 V (±10%) 50/60 Hz power or on 220 V (±10%) 50/60 Hz with the use of a power adapter.

Shield gas:100% CO2/MIG, 25%CO2, 75% Argon MAG Welding .
Wire recommendation: .030" (0.8mm) &.035" (0.9mm) ER70S-6 Mild Steel MIG Welding Wire.
5/8"-18RH gas fitting easy to install and remove.
Default wire setting: .035" (0.9mm).
Release hard moving of gas cylinder, release the low efficiency of stick welds, works with gasless flux wire perfectly.
Welding wire recommendation: ET71-GS flux wire (.030" flux wire is available on tension 3.5 & Amp>100A.)


Smooth welding and fast burning.
Capable of welding with 7018/6011 electrodes.
Electrode up to 1/8"@110V, 5/32"@220V.
Apply to 9/64" thick carbon steel @110V, 13/64"@220V.
Capable of Lift TIG welding.
Accessories for TIG welding-TIG torch and tungsten not included.
Recommend to use YesWelder WP-17V-35 TIG torch.


Compatible with 2-lbs and 10-lbs welding wire. (4" or 8" Wire diameter: D100/D200)
Great for .030" /.035” solid wire, .035" flux core wire for welding carbon steel material.
2T/4T Selection:
2T: Great for spot welding with simple pull/release triggers.
4T: Great for longer welds without the need to apply continuous finger pressure.
Welding mode:switching to 100% CO2/MIG, 25%CO2, 75% Argon MAG Welding, 100% Argon Lift TIG/Stick.
Diameter of wire: 0.6(.023") 0.8(.030") &0.9(.035") on CO2/MIG and MAG conditions. Only .035" available for gasless welding.
Gas checking.
Manual wire feeding selection.
Display showing with various value: A, V, Thickness and inductance.

Product weight: 23lb
Product Dimensions: 18.11"*8.07"*14.17"
Supply Voltage: 110V/220V 50/60 Hz
Input Current: 45A@110V, 30A@220v
Output Current: 30-205A (MIG) 20-180A (MMA) @220V; 30-166A (MIG) 20-146A (MMA) @110V
Duty Cycle: @110V, 60%@160A, 100%@123A @220V, 60%@205A, 100%@158A
Can apply to 2 and 10 pound rolls of wire
Welding Material: Carbon Steel
Protection Class: IP21S
