Compare All-in-One
CT-520
TIG, stick and plasma in one 3-in-1 with HF start.
From $399.20$499.00
or 4 payments of $99.80 with Klarna*
CT2050
7-in-1 AC/DC TIG, stick and plasma with a built-in air pump.
From $1,499.00
or 4 payments of $374.75 with Klarna*
MCT520
5-in-1 MIG, TIG, stick and plasma combo with HF start.
From $699.00
or 4 payments of $174.75 with Klarna*
Quick Look
- TIG + plasma combo
- Key Feature
- LED
- Display
- Steel / Stainless / Aluminum
- Material Compatibility
- ≤ 3/8" (10 mm) @ 220V
- Recommended Thickness
- 200A
- Max Output
- TIG / Stick / Plasma
- Processes
- 110V / 220V
- Input Voltage
- Built-in pump + CNC
- Key Feature
- LED
- Display
- Steel / Stainless / Aluminum
- Material Compatibility
- ≤ 1/4" (6 mm) @ 220V
- Recommended Thickness
- 200A
- Max Output
- TIG / Stick / Plasma
- Processes
- 96-265V
- Input Voltage
- 5-in-1 synergic combo
- Key Feature
- LED
- Display
- Steel / Stainless / Aluminum
- Material Compatibility
- ≤ 3/8" (10 mm) @ 220V
- Recommended Thickness
- 200A
- Max Output
- MIG / Flux / TIG / Stick / Plasma
- Processes
- 110V / 220V
- Input Voltage
Power & Output
Input Voltage
110V, 220V ±15% 50/60Hz
Single-phase 96-265V 50/60Hz
110V, 220V ±15% 50/60Hz
Processes
DC TIG (Pulse), Stick, Plasma
AC/DC TIG (Pulse), Stick, Plasma (Built-in Pump)
MIG, Flux-Cored, DC TIG, Stick, Plasma
Output Current Range
TIG: 10-160A @ 110V; 10-200A @ 220V Stick: 20-120A @ 110V; 20-200A @ 220V Plasma: 20-30A @ 110V; 20-50A @ 220V
TIG: 5-160A @ 110V; 5-200A @ 220V Stick: 10-160A @ 110V; 10-200A @ 220V Plasma: 12-25A @ 110V; 12-45A @ 220V
MIG: 30-130A @ 110V; 30-200A @ 220V TIG: 15-130A @ 110V; 15-200A @ 220V Stick: 20-130A @ 110V; 20-200A @ 220V Plasma: 20-35A @ 110V; 20-50A @ 220V
Duty Cycle
TIG: 60% @ 200A
TIG: 100% @ 200A
MIG: 60% @ 200A
Detailed Duty Cycle
TIG (110V): 60% @ 160A; 100% @ 124A TIG (220V): 60% @ 200A; 100% @ 155A Stick (110V): 60% @ 120A; 100% @ 93A Stick (220V): 60% @ 200A; 100% @ 155A Plasma (110V): 60% @ 30A; 100% @ 23A Plasma (220V): 60% @ 50A; 100% @ 39A
TIG (110V): 100% @ 160A TIG (220V): 100% @ 200A Stick (110V): 60% @ 120A; 100% @ 160A Stick (220V): 100% @ 160A Plasma (110V): 100% @ 25A Plasma (220V): 100% @ 45A
MIG (110V): 60% @ 130A; 100% @ 101A MIG (220V): 60% @ 200A; 100% @ 155A TIG (110V): 60% @ 130A; 100% @ 101A TIG (220V): 60% @ 200A; 100% @ 155A Stick (110V): 60% @ 130A; 100% @ 100A Stick (220V): 60% @ 200A; 100% @ 155A Plasma (110V): 60% @ 35A; 100% @ 27A Plasma (220V): 60% @ 50A; 100% @ 39A
Material & Capability
Material Compatibility
TIG: Steel, Stainless Steel Stick: Steel Plasma: Steel, Stainless Steel, Aluminum
TIG: Steel, Stainless Steel, Aluminum Stick: Steel Plasma: Steel, Stainless Steel, Aluminum
MIG: Steel, Stainless Steel, Aluminum TIG: Steel, Stainless Steel Stick: Steel Plasma: Steel, Stainless Steel, Aluminum
Recommended Thickness
TIG: ≤ 3/16" (5 mm) @ 110V; ≤ 5/16" (8 mm) @ 220V Stick: ≤ 1/4" (6 mm) @ 110V; ≤ 3/8" (10 mm) @ 220V
TIG: ≤ 5/32" (4 mm) @ 110V; ≤ 3/16" (5 mm) @ 220V Stick: ≤ 3/16" (5 mm) @ 110V; ≤ 1/4" (6 mm) @ 220V
MIG: ≤ 3/16" (5 mm) @ 110V; ≤ 5/16" (8 mm) @ 220V TIG: ≤ 3/16" (5 mm) @ 110V; ≤ 5/16" (8 mm) @ 220V Stick: ≤ 1/4" (6 mm) @ 110V; ≤ 3/8" (10 mm) @ 220V
Clean Cut Thickness
5/16" (8 mm) @ 110V 9/16" (14 mm) @ 220V
3/8" (10 mm) @ 110V 19/32" (15 mm) @ 220V
5/16" (8 mm) @ 110V 1/2" (13 mm) @ 220V
Severance Cut Thickness
9/16" (14 mm) @ 110V 3/4" (20 mm) @ 220V
3/4" (20 mm) @ 110V 1 3/16" (30 mm) @ 220V
1/2" (13 mm) @ 110V 5/8" (16 mm) @ 220V
MIG
Synergic Function
Not applicable
Not applicable
Supported
Spool Gun Compatibility
Not applicable
Not applicable
Supported
MIG Wire Type
Not applicable
Not applicable
ER70S-6 / E71T / ER308L / ER4043 / ER5356
Wire Diameter
Not applicable
Not applicable
.023" (0.6 mm) / .030" (0.8 mm) / .035" (0.9 mm) / .045" (1.1 mm)
MIG Torch Type
Not applicable
Not applicable
YW-L150-10E (European connector)
Gas Requirements
Not applicable
Not applicable
CO2 100%, Mix Gas, Argon 100%
Wire Feed Mechanism
Not applicable
Not applicable
2-Roll, 4-Roll
Consumables Compatibility
Not applicable
Not applicable
Magnum 100L
TIG
TIG Ignition Type
HF Start
HF Start
HF Start
Foot Pedal Compatibility
Supported
Supported
Not supported
Tungsten Type
WT20, WC20, WL20, WL15
WT20, WC20, WL20, WL15, WP
WT20, WC20, WL20, WL15
Tungsten Diameter
≤ 1/8" (3.2 mm)
≤ 5/32" (4.0 mm)
≤ 3/32" (2.4 mm) @ 110V ≤ 1/8" (3.2 mm) @ 220V
TIG Torch Type
WP-26 (M16 × 1.5 connector, 5-pin control cable)
WP-26 (M16 × 1.5 gas connector, KDP35-50 electric connector, 5-pin control cable)
WP-17 (M16 × 1.5 connector, 5-pin control cable)
TIG Filler Rod Material
ER70S-6, ER308L
ER70S-6, ER308L, ER4043
ER70S-6, ER308L
TIG Filler Rod Diameter
≤ 3/32" (2.4 mm) @ 110V ≤ 1/8" (3.2 mm) @ 220V
≤ 3/32" (2.4 mm) @ 110V ≤ 1/8" (3.2 mm) @ 220V
≤ 3/32" (2.4 mm) @ 110V ≤ 1/8" (3.2 mm) @ 220V
Gas Requirements
100% Argon
100% Argon
100% Argon
Consumables Compatibility
WP-17 / WP-18 / WP-26
WP-17 / WP-18 / WP-26
WP-17 / WP-18 / WP-26
Stick
Stick Electrode Type
E6011 / E6013 / E7018
E6010 / E6011 / E6013 / E7018
E6011 / E6013 / E7018
Stick Electrode Diameter
≤ 3/32" (2.4 mm) @ 110V ≤ 5/32" (4.0 mm) @ 220V
≤ 3/32" (2.4 mm) @ 110V ≤ 5/32" (4.0 mm) @ 220V
≤ 3/32" (2.4 mm) @ 110V ≤ 1/8" (3.2 mm) @ 220V
Plasma Cutting
Pilot Arc
Supported
Supported
Not supported
Plasma Arc Starting
HF Start
Back-flow Start
Contact
Air Pressure
45-70 PSI (3.1-4.8 bar)
45-60 PSI @ 110V; 55-75 PSI @ 220V
45-70 PSI (3.1-4.8 bar)
Air Flow
2.8-3.5 CFM (80-100 L/min)
≥ 6.0 CFM
2.8-3.5 CFM (80-100 L/min)
Recommended Compressor
30-60 gal, ≥ 2 HP
30-60 gal, ≥ 2 HP
30-60 gal, ≥ 2 HP
Plasma Torch Type
AG60 (M16 × 1.5 connector, 5-pin control cable)
IPL50 (M16 × 1.5 connector, 5-pin control cable)
PT31 (M16 × 1.5 connector, 5-pin control cable)
CNC Capability
Not supported
CNC ready
Not supported
Gas Requirements
Compressed Air
Compressed Air
Compressed Air
Consumables Compatibility
AG60
IPL50-45
PT31
Physical & Safety
Display
LED
LED
LED
Fan Control
Continuous Fan Mode
Fan on Demand
Continuous Fan Mode
App Control
Not supported
Not supported
Not supported
Weight
18.96 lbs
44.9 lbs
27 lbs
Dimensions
19.49" × 8.23" × 14.17"
18.5" × 13.6" × 8.7"
17.7" × 9.2" × 16.9"
Protection Features
Overheat Overcurrent Undervoltage
Overheat Overcurrent VRD (Voltage Reduction Device) - Stick
Overheat Overcurrent Undervoltage
General
Input Current
50A
50A @ 110V; 40A @ 220V
50A
Open Circuit Voltage (OCV)
TIG/Stick: 60V Plasma: 320V
TIG: 68V Stick: 68V (VRD: 7V) Plasma: 312V
MIG/TIG/Stick: 60V Plasma: 280V
Generator Compatibility
Minimum generator: 15 kW (20 HP)
Generator not recommended. If necessary, use at least a 10 kW (15 HP), 120/240V generator with AVR.
Minimum generator: 15 kW (20 HP)
Cable Length
Ground: 10 ft (3 m) TIG Torch: 13 ft (4 m) Plasma Torch: 13 ft (4 m)
Ground: 10 ft (3 m) TIG Torch: 13 ft (4 m) Plasma Torch: 13 ft (4 m)
Ground: 10 ft (3 m) TIG Torch: 13 ft (4 m) Plasma Torch: 13 ft (4 m)
Power Cord Length
6.5 ft (2 m)
6.5 ft (2 m)
6.5 ft (2 m)
Warranty
2 Years
3 Year
2 Years